7. Mechanical spares and servicing procedures
7. MECHANICAL SPARES AND SERVICING
PROCEDURES
Overview
•
•
•
•
•
7.1
The color wheel and sensor
Overview
•
•
•
•
Replacing the color wheel sensor
•
Replacing the color wheel connection board
7.1.1
Description
Spoke
The spoke of a color wheel is the transition line between two different color segments.
RGBW color wheel
Color wheel with a red, a green, a blue and a white segment.
RGBRGB color wheel
Color wheel with two red, two green and two blue segments.
The projector type H250 has a RGBRGB color wheel, the projector type H400 (H500) has a RGBW color wheel.
Description of the color wheel
The color wheel is driven by a motor. The speed of the motor is controlled accurately by a locked loop and linear current control.
The revolution speed is three times the frame rate of the displayed image.
The position of the color wheel is detected by the sensor, which detects a black mark on the motor shaft.
This speed control and position detection makes it possible to accomplish a perfect synchronization of color wheel, lamp and DMD
reset driver.
R59770097 ID H250 / H500 15/05/2007
81
Summary of Contents for iD H250
