![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134089.webp)
7. Mechanical spares and servicing procedures
7.1.4
Replacing the color wheel sensor
Necessary tools
•
screwdriver Philips Ph1
•
nutspanner 5mm
How to remove the color wheel sensor?
1. Remove the color wheel — See "Replacing the color wheel", page 82
2. Remove the two bolts fixing the sensor to the color wheel assembly
Caution:
Each of these bolts have a nut screwed on it!
Image 7-9
Fixing bolts of the color wheel sensor
Image 7-10
Nuts on the fixing bolts of the color wheel sensor
3. Remove the color wheel sensor
7.1.5
Replacing the color wheel connection board
Necessary tools
screwdriver Torx T10
How to remove the color wheel connection board?
1. Remove the lamp cover
2. Unplug the connectors as described below:
- J101: color wheel motor
- J103: color wheel sensor
- J38: control signals from the formatter board
R59770097 ID H250 / H500 15/05/2007
85
Summary of Contents for iD H250
