![background image](http://html1.mh-extra.com/html/barco/id-h250/id-h250_service-manual_3858134017.webp)
2. General information
2.6
Mounting the lens
Necessary tools
No tools.
How to mount the lens?
1. Make sure the lens locking handle is not pulled out
2. Gently push the lens into the lens holder until it is locked (click!)
Caution:
When the projector is not fixed onto its support, hold it back while pushing in the lens, to avoid shifting the projector.
Caution:
When a motorized lens is used, be careful not to damage the connection jig in the lens holder (left top side). Make
sure the lens is positioned well before pushing it into its lock.
Image 2-10
Lensholder jig
2.7
Removing the rear cover
Necessary tools
slot 10mm screwdriver
W
ARNING
:
Risk of burns: respect the cooling down time of the projector before starting any replacement
procedures!
W
ARNING
:
Risk of electrical shock: before starting the replacement procedures, power down the projector
and unplug the power cord from the wall outlet!
How to remove the back cover?
1. Use a screwdriver to turn the rear cover lock screw a quarter turn counterclockwise.
R59770097 ID H250 / H500 15/05/2007
13
Summary of Contents for iD H250
