7. Mechanical spares and servicing procedures
Image 7-13
Location of the lens shift motor
How to remove the lens shift motor?
1. Unplug connector J5 on the motor connector board
Image 7-14
Connector to the lens shift motor
2. Remove the two screws (“A”) fixing the lens shift motor to the lensholder
Image 7-15
A: screws fixing the lens shift motor
Note:
If the lens position is too high, one can not reach the fixing screws and the lens holder must be taken apart.
3. Slide out the lens shift motor
R59770097 ID H250 / H500 15/05/2007
87
Summary of Contents for iD H250
