![background image](http://html1.mh-extra.com/html/barco/f70-series/f70-series_user-manual_3054245033.webp)
33
601–426 /15
F70 Series
1
2
Image 2–1
2.
Insert the two AA size batteries, making sure the polarities match the + and - marks inside the battery
compartment.
Tip:
Use alkaline batteries for optimum range and life time.
+
-
-
+
Image 2–2
3.
Insert (1) both lower tabs of the battery cover in the gaps at the bottom of the remote control, and press (2)
the cover until it clicks in place.
+
-
-
+
1
2
Image 2–3
When replacing batteries, the broadcast address of the RCU will be reset to its default value '0'.
CAUTION:
Replace with the correct battery type. Use two AA size batteries
2.9.2 Remote control, protocol setup
About the used protocol
The protocol is the code send out by the remote control when a button is pressed. Depending on this code, the
projector can decode the signals. The remote control can be used with two different protocols, RC5 and NEC.
Depending on the projector to control, the remote control can be switched between these protocols.
Summary of Contents for F70 Series
