6. CSE-800 Configurator
we strongly advise to reserve IP addresses in your DHCP server for each Base Unit to prevent issues when the hostname is not
resolvable.
NTP
When using EAP-TLS, you must also con
fi
gure NTP on the Base Unit. This can be done via the Base Unit WebUI. The Base Unit
must have the correct time to handle the certi
fi
cates required for EAP-TLS. Preferably, you should use an NTP server with high
availability on the local corporate network. Be advised that, when using an NTP server on the internet, the Base Unit cannot connect
through a proxy server.
Advice
To check if a button could reach the Base Unit please connect a PC in the same way a Button would connect (same user name,
pw, certi
fi
cates) and ping the Base Unit’s hostname, you can
fi
nd the hostname in the Based Units Con
fi
gurator. If the ping fails try
pinging the IP adjust your network setup so pinging the hostname is successful.
We strongly advise to reserve IP addresses in your DHCP server for each Base Unit to prevent issues when the hostname is not
resolvable.
Start up
Due to the complexity of the ClickShare Network Integration feature, you must activate it
fi
rst. To activate, go to the Network inte-
gration and click
Change con
fi
guration
button.
The Corporate Network Integration feature is provided “AS IS”, without any liability or obligation of or on be-
half of Barco. Barco cannot guarantee that the feature works in your corporate network. The reliability, quality
and stability when sharing using the Corporate Network Integration depends on your network infrastructure.
Image 6-26
Network integration, activation
A setup wizard starts up.
Apps
To allow mobile devices connected to the corporate network to share content with any Base Unit on the network, you need enable
those via the
Wi-Fi & Network
>
Services
page of the Con
fi
gurator. Make sure the proper Services are enabled and the
Enable over
LAN
box is checked.
You must repair all the Buttons after completing the setup wizard !
R5900049 CLICKSHARE CSE-800 19/03/2018
49
Summary of Contents for ClickShare CSE-800
