Barco ClickShare CSE-800, Installation Manual

Page: 39 / 100

5. Preparing the buttons
5. PREPARING THE BUTTONS
Overview
• Pairing
• ClickShare Extension Pack
• ClickShare Extension Pack installer
5.1 Pairing
Pairing of the Buttons with the Base Unit
To be able to use a Button it should be assigned to the Base Unit you are using. This process is called pairing. By default, the
Button(s) delivered with the CSE-800 set are already paired to the speci
fi c Base Unit.
In case you buy additional Buttons or when a Button should be assigned to another Base Unit, the Button needs to be paired (again).
The Button software update runs in the background and will not impact users while using the system. If desired, this feature can
be disabled in the Web Interface. When downgrading or updating to an older version of the Base Unit software the Buttons need to
paired manually to update their software and that only in case the Button update over Wi-Fi is disabled.
A Button can only be paired to one Base Unit at a time.
The Button will always make connection to the Base Unit it was last paired to.
To pair a Button to the Base unit
1. Insert the Button in the USB port at the front of the Base Unit you are using.
Image 5-1
Pair button
R5900049 CLICKSHARE CSE-800 19/03/2018 23