Barco ClickShare CSE-800, Installation Manual

Page: 59 / 100

6. CSE-800 Configurator
6.10 Display setup, Inputs
About the inputs
When a input source is connected to one of the inputs (HDMI1 or HDMI2), the corresponding Signal led lits up. The name of the
source is displayed next to Source Name but can be changed. This source name is displayed on the screen.
How to change the source name
1. Log in to the Con fi gurator .
2. Click Display & Audio → Inputs .
Image 6-20
Inputs
3. Click in the input fi eld, select the current name and enter a new name.
4. Click on Save changes to apply the new settings.
6.11 WiFi settings
W
ARNING
:
It is not allowed to operate the Base Unit outside its intended geographical region.
About WiFi
A connection with the Base Unit can be made via a wireless connection. A fi xed wireless IP address is used to establish the con-
nection.
The transmission power of the wireless signal can be reduced. When reducing the transmission power, it is reduced for both fre-
quencies.
Changing the IP address will require a repairing of the Buttons used with this Base Unit.
R5900049 CLICKSHARE CSE-800 19/03/2018 43