Barco ClickShare CSE-800, Installation Manual

Page: 88 / 100

6. CSE-800 Configurator
The following settings are the defaults:
•
Meeting room identi fi cation info is cleared.
• Language is set to English.
• Custom wallpapers are removed and the default wallpaper is restored.
• Standby timer is reset to 10 min.
• Hostname and SSID is set to clickshare-serialnumber .
• The SSID is broadcasted
• WiFi password is reset to clickshare .
• The default WiFi channel is set back to frequency 5 GHz, channel 36.
• The update history is cleared.
• The table with the associated Buttons is cleared.
• The admin password is reset to admin .
• Debug logging and remote logging are disabled.
Restoring to factory defaults will require a repairing of the Buttons used with this Base Unit.
How to restore factory defaults
1. Log in to the Con fi gurator .
2. Click Support & Updates → Troubleshoot .
Image 6-64
Troubleshoot, factory defaults
3. Click Reset to factory defaults .
The following message is displayed: “This action will remove all settings of the Base Unit and replace them with the default
settings. Are you sure you want to continue?”
4. If you want to continue, click Yes, remove all settings otherwise click No, I changed my mind .
When yes is clicked, the system starts a reboot.
Alternative way: The Base Unit can be reset to factory defaults by plugging in the power cable while pressing
the reset button.
72 R5900049 CLICKSHARE CSE-800 19/03/2018