Banner EZ-SCREEN SLS, Instruction Manual

Page: 70 / 114

May 22, 2023
EZ-SCREEN SLS Safety Light Curtain Instruction Manual
(1)
150 mm SLSC.. systems not available.
70
The control reliability, installation and alignment, electrical interface to the guarded machine, initial checkout, periodic check-
out, troubleshooting and maintenance features of cascadeable models are functionally identical to those of the standard mod-
els. Electrical connections are made through M12 quick-disconnects. The emitter has an 8-pin connector for power and
ground. Optional 5-pin emitters with Remote Test function are available.
The receiver has an 8-pin connector for power, ground, reset, EDM #1 and #2, and OSSD #1 and #2. All systems in a cas-
cade are activating the same set of OSSD outputs, which are the OSSDs of the master receiver.
In a cascaded system, all receivers are connected together, and all emitters are connected together.
A stand-alone cascadeable EZ-SCREEN SLS system includes a compatible emitter and receiver (equal length and resolu-
tion; available separately or in pairs), a terminator plug for the receiver and two single-ended (machine interface) cables.
A multiple-light screen cascaded EZ-SCREEN SLS system includes compatible emitter/receiver pairs (up to four), a termina-
tor plug for the last receiver in the cascade, two single-ended cables to interface with the machine and provide power to the
system, and pairs of double-ended (sensor interface) cables to interconnect the emitters and the receivers in the cascade.
The terminator plug must be used on the receiver in a stand-alone system, and on the last receiver in a multiple-system cas-
cade or, a QDE2R4-8..D cable interfaced with an E-stop or other hard contacts (see
" Emergency Stop Buttons and Rope/Ca-
ble Pulls " on page 79 and " Positive-Opening Interlocking Safety Switches " on page 81 ).
Available single-ended, double-ended, and splitter cables are listed in " Cordsets " on page 91 . Cable lengths are limited – for
both the power cables and the interconnect cables; see " Determining Interconnect Cable Lengths " on page 72 for more in-
formation.
IMPORTANT: If a cascaded system requires the Remote Test function (see " Remote Test Input " on page
46 ), then all emitters in the cascade must be 5-pin emitter models (model SLSCE..-..Q5); the interconnec-
tion between these cascaded emitters can only be accomplished using 5-pin DEE2R-5..D cables.
The 14 mm Resolution Cascadeable Models have a 0.1 m to 6 m (4 in to 20 ft) range. Only standard 8-pin QD models are
listed; 8-pin emitters/receivers feature “swapable” wiring. see " Initial Electrical Connections " on page 35 and " Sensor "Swa-
pability"" on page 46 .
For cabling options, see " Cordsets " on page 91 .
Machine interface/power cables (one per end sensor, two per pair): Use QDE-..D cables.
Sensor interconnect cables (one per cascaded sensor, two per pair): Use DEE2R-..D cables.
Defined Area Height
(1)
Emitter (8-pin) Receiver Emitter/Receiver Pair Number of Beams
Response Time (Tr)
(ms)
300 mm (11.8 in) SLSCE14-300Q8 SLSCR14-300Q8 SLSCP14-300Q88 40 15
450 mm (17.7 in) SLSCE14-450Q8 SLSCR14-450Q8 SLSCP14-450Q88 60 19
600 mm (23.6 in) SLSCE14-600Q8 SLSCR14-600Q8 SLSCP14-600Q88 80 23
750 mm (29.5 in) SLSCE14-750Q8 SLSCR14-750Q8 SLSCP14-750Q88 100 27
900 mm (35.4 in) SLSCE14-900Q8 SLSCR14-900Q8 SLSCP14-900Q88 120 32
1050 mm (41.3 in) SLSCE14-1050Q8 SLSCR14-1050Q8 SLSCP14-1050Q88 140 36
1200 mm (47.2 in) SLSCE14-1200Q8 SLSCR14-1200Q8 SLSCP14-1200Q88 160 40
1350 mm (53.1 in) SLSCE14-1350Q8 SLSCR14-1350Q8 SLSCP14-1350Q88 180 43
1500 mm (59 in) SLSCE14-1500Q8 SLSCR14-1500Q8 SLSCP14-1500Q88 200 48
1650 mm (65 in) SLSCE14-1650Q8 SLSCR14-1650Q8 SLSCP14-1650Q88 220 52
Continued on page 71
System Components and Specifications
8.2
Cascadeable Emitter and Receiver Models with 14 mm Resolution
8.2.1
© Banner Engineering Corp.