Banner EZ-SCREEN SLS, Instruction Manual

Page: 101 / 114

May 22, 2023
EZ-SCREEN SLS Safety Light Curtain Instruction Manual
(1)
Available in a kit that includes one M18 EZ-LIGHT, one SMB18A mounting bracket, and hardware for mounting to the side channel of an EZ-SCREEN housing
(kit model number EZA-M18RGX8PQ8).
101
Model Description
LAT-1-SS
Self-contained visible-beam laser tool for aligning any EZ-SCREEN 14 mm and 30 mm
emitter/receiver pair. Includes retroreflective target material and mounting clip.
EZA-LAT-SS Replacement adaptor (clip) hardware for SLS.. models
EZA-LAT-2 Clip-on retroreflective LAT target
BRT-THG-2-100 2-inch retroreflective tape, 2.5 m (100 in)
BT-1 Beam Tracker
Provides clear, 360° indication of the of the EZ-SCREEN receiver's output status. Use with a CSB splitter cable and optional
DEE2R double-ended cables. See datasheet p/n 121901 for more information.
Models Construction Connector/LED Function/Inputs
M18RGX8PQ8
(1)
Nickel-plated brass housing, M18x1 thread; thermo-
plastic lens
Fully encapsulated IP67
8-pin M12 Integral QD
Red/Green indication follows OSSD output of
the EZ-SCREEN receiver
ON Red: —Power ON Beam Blocked or
Lockout
ON Green: —Power ON Beam Clear
PNP (Sourcing)
K30LRGX8PQ8
Polycarbonate housing, 30 mm thermoplastic dome, 22
mm base mount
Fully encapsulated, IP67
K50LRGX8PQ8
Polycarbonate housing, 50 mm thermoplastic dome, 30
mm base mount
Fully encapsulated, IP67
K80LRGX8PQ8
Polycarbonate housing, 50 mm thermoplastic dome,
flat or DIN mount
Encapsulated electronics, IP67
Alignment Aids
10.13
EZ-LIGHT for EZ-SCREEN
10.14
© Banner Engineering Corp.