Banner EZ-SCREEN SLS, Instruction Manual

Page: 21 / 114

May 22, 2023
EZ-SCREEN SLS Safety Light Curtain Instruction Manual
21
•
•
•
•
•
•
•
•
Chapter Contents
5.1 Installation and Alignment ......................................................................................................................................................................... 21
5.2 Mechanical Installation Considerations ....................................................................................................................................................... 21
5.3 Mounting the Emitter and Receiver ............................................................................................................................................................. 32
5.4 Sensor Mounting and Mechanical Alignment .............................................................................................................................................. 33
5.5 Mounting the Reset Switch.......................................................................................................................................................................... 34
5.6 Routing Cordsets......................................................................................................................................................................................... 34
5.7 Initial Electrical Connections ..................................................................................................................................................................... 35
5.8 Initial Checkout Procedure .......................................................................................................................................................................... 35
5.9 Electrical Connections to the Guarded Machine ........................................................................................................................................ 42
5.10 Auxiliary (Aux.) Output ............................................................................................................................................................................. 46
5.11 Remote Test Input .................................................................................................................................................................................... 46
5.12 Preparing for System Operation .............................................................................................................................................................. 46
5.13 Sensor "Swapability" ................................................................................................................................................................................. 46
5.14 Generic Wiring Diagrams .......................................................................................................................................................................... 47
Before installing the EZ-SCREEN SLS Safety Light Curtain , read " Appropriate Applications and Limitations " on page 11 and
the installation instructions of the EZ-SCREEN 14/30mm manual (p/n 112852) in their entirety.
The System’s ability to perform its safety guarding function depends upon the appropriateness of the application and upon its
proper mechanical and electrical installation and interfacing to the guarded machine. If all mounting, installation, interfacing,
and checkout procedures are not followed properly, the System cannot provide the protection for which it was designed. In-
stallation must be performed by a Qualified Person, as defined in
" Security Protocol " on page 53 .
WARNING:
Read this Section Carefully Before Installing the System
Failure to follow these instructions could result in serious injury or death.
If all mounting, installation, interfacing, and checkout procedures are not followed properly,
this
Banner Engineering Corp. device cannot provide the protection for which it was designed.
The user is responsible for ensuring that all local, state, and national laws, rules, codes, or regula-
tions relating to the installation and use of this control system in any particular application are sat-
isfied. Ensure that all legal requirements have been met and that all technical installation and
maintenance instructions contained in this manual are followed.
The user has the sole responsibility to ensure that this Banner Engineering Corp. device is in-
stalled and interfaced to the guarded machine by Qualified Persons, in accordance with this manu-
al and applicable safety regulations. A Qualified person is a person who, by possession of a recog-
nized degree or certificate of professional training, or who, by extensive knowledge, training and
experience, has successfully demonstrated the ability to solve problems relating to the subject
matter and work.
The two primary factors that influence the layout of the EZ-SCREEN SLS system mechanical installation are:
Safety Distance (Minimum Distance) (see "Calculating the Safety Distance (Minimum Distance)" on page 22 )
Supplemental safeguarding/eliminating pass-through hazards (see " Reducing or Eliminating Pass-Through Hazards "
on page 25 )
Other considerations include:
Emitter and Receiver Orientation (see " Emitter and Receiver Orientation " on page 27 )
Installation Instructions
Chapter 5
Installation and Alignment
5.1
Mechanical Installation Considerations
5.2
© Banner Engineering Corp.