B&R 8I84T200037.01P-1, User Manual

Page: 47 / 405

Installation guide
ACOPOSinverter P84 User's Manual 2.10 47
Model number 8I84T400075.01P-1 8I84T400150.01P-1 8I84T400220.01P-1 8I84T400300.01P-1
Input impedance
Voltage 30 kΩ
Current 242 Ω
Relay outputs
Quantity 2
Nominal voltage 30 VDC / 250 VAC
Switching capacity
Min. 3 mA for 24 VDC
Max.
With resistive load (cos φ = 1
and L/R = 0 ms)
2 A for 250 VAC or 30 VDC
With inductive load (cos φ = 0.4
and L/R = 7 ms)
1.5 A for 250 VAC or 30 VDC
Design
Relay 1 1 NO contact and 1 NC contact with a common point
Relay 2 1 NO contact
Response time (max.) <7 ms ±0.5 ms
Electrical isolation
Output - ACOPOSinverter Yes
Output - Output No
Analog outputs
Quantity 1
Output 0 to 10 V or 0 to 20 mA
8)
Electrical isolation
Output - ACOPOSinverter Yes
Output - Output No
Max. load impedance
Voltage 470 Ω
Current 500 Ω
Update time <2 ms ±0.5 ms
Resolution 10-bit
Operating conditions
Installation at elevations above sea
level
0 to 1000 m
Degree of protection per EN 60529 Upper part: IP21 and IP41
Lower part: IP54 (heat sink)
Ambient temperature -10 to 50°C
Max. ambient temperature Up to 60°C
Relative humidity per IEC 60068-2-3 5 to 95%, non-condensing
No dripping water
Maximum installation elevation Up to 3000 m
9)
Max. pollution degree per IEC/EN
61800-5-1
2 (non-conductive pollution)
Environmental conditions per IEC
60721-3-3
Class 3C1 and 3S2
Operating position Vertical mounting orientation ±10%
Environmental conditions
Temperature
Storage -25 to 70°C
Vibration
Operation 3 to 13 Hz: 1.5 mm amplitude / 13 to 200 Hz: 1 g
Shock
Operation 15 g, 11 ms
Mechanical characteristics
Dimensions
Width 130 mm 155 mm
Height 230 mm 260 mm
Depth 175 mm 187 mm
Weight 3 kg 4 kg
Table 15: 8I84T400075.01P-1, 8I84T400150.01P-1, 8I84T400220.01P-1, 8I84T400300.01P-1 - Technical data
1) Shield plate included in delivery
2) For shielded motor cables
≤10 m → At a clock frequency of 4 kHz
≤5 m → At a clock frequency of 4.1 to 16 kHz
3) For shielded motor cables
≤50 m → At a clock frequency of 4 kHz
≤20 m → At a clock frequency of 4.1 to 16 kHz
4) For shielded motor cables
≤100 m → At a clock frequency of 4 kHz
≤50 m → At a clock frequency of 4.1 to 16 kHz
5) These values are valid for the rated clock frequency.
6) The min. resistance value is specified at a temperature of 20°C.