B&R 8I84T200037.01P-1, User Manual

Page: 332 / 405

Programming guidelines
332 ACOPOSinverter P84 User's Manual 2.10
Contrast
Keypad stand-by
Start menu
<< >>
RDY
Term
+0.00 Hz
0 A
7.3 PARAMETER TERMINAL
Quick Code
Parameter overview [DISPLAY CONFIG.]
Code Name/Description Setting range Factory settings
[Keypad contrast] 0 to 100% 50%
Adjust the contrast on the graphical display.
[Standby] [5]
Configures and the standby mode of the graphic display and makes adjustments.
[No] : No standby mode
[1] to [10] : Sets the time (in minutes), during which the terminal must remain idle before the standby mode is triggered.
After this idle time, the background lighting of the display is switched off and the contrast is reduced. If a key or the navigation key is pressed, the
screen returns to normal operation. This also happens if the terminal ends the normal display mode, for example in the event of a fault.
[Start menu] [Main menu]
Selection of the menu that appears on the product when it is started
[FU menu] : Displays the Drive menu.
[Fast start] : Displays the fast start menu.
[Monitoring] : Displays the monitoring menu.
[Setting] : Displays the setting menu.
[Mot. data] : Displays the motor control menu.
[I/O config.] : Displays the input/output configuration menu.
[Control] : Displays the control menu.
[Application fct] : Displays the application function menu.
[Fault mgt] : Displays the fault management menu.
[Communic.] : Displays the communication menu.
[Diagnostics] : Displays the diagnostic menu.
[Identif.] : Displays the identification menu.
[FACTORY SETTING] : Displays the factory setting menu.
[User menu] : Displays the user menu.
[CI menu] : Displays the CI menu.
[Main menu] : Displays the main menu.