Bale Band-It GFC 100, Operator'S Manual

Page: 67 / 108

Operator’s Manual 62
unplug the two 10 amp fuses. Reconnect main electrical power only. Wait
approximately 10 seconds and then reinstall the two 10 amp fuses at the same time.
Recheck number on Line 3 after the dash, it should then be 1. Apply hydraulics.
040 Left Fetcher Out reed switch is stuck on.
Note: Before the machine extends the Right/Left Fetcher cylinders it does a safety
check on the Left Fetcher Out reed switch. It checks to see if the reed switch is stuck
on. If it is, it will wait until the reed switch is off before continuing the operation.
- Loosen nuts on Left Fetcher Out reed switch and hold the switch away from any
magnets or metal for approximately 10 seconds. Check tractor box display to see if it
is still displays “040”. If it does, lightly tap the switch on something to free up the
stuck switch. The switch may need to be replaced if this problem continues.
041 Right Fetcher Out reed switch is stuck on.
Note: Before the machine extends the Right/Left Fetcher cylinders it does a safety
check on the Right Fetcher Out reed switch. It checks to see if the reed switch is stuck
on. If it is, it will wait until the reed switch is off before continuing the operation.
- Loosen nuts on Right Fetcher Out reed switch and hold the switch away from any
magnets or metal for approximately 10 seconds. Check tractor box display to see if it
is still displays “041”. If it does, lightly tap the switch on something to free up the
stuck switch. The switch may need to be replaced if this problem continues.