Bale Band-It GFC 100, Operator'S Manual, Page: 49 / 108

Operator’s Manual 44
015 Waiting for Strap Guide Arms at Bale Position 3.
Note: The machine has turned on the Strap Guide Arms motor and sent them down.
When the Strap Guide Arms magnet reaches the Bale Position 3 sensor bar switch, the
machine stops the motor. The machine is waiting for the magnet to reach the Bale
Position 3 sensor bar switch.
The switch is located near the bottom of the sensor bar at
the yellow mark.
Check position of Strap Guide Arms.
If Strap Guide Arms are on the floor,
- Check how the return line is hooked to the tractor and make sure there is NO
BACKPRESSURE. If there is any backpressure at all the Bale Band-It will not operate