Operator’s Manual 92
096 Bale Position 2 sensor bar switch stuck on.
Note: Before the machine will lower the Strap Guide Arms, it does a safety check on
the Bale Position 2 sensor bar switch. It checks to see if the sensor bar switch is stuck
on. If it is, it will wait until the sensor bar switch is off before continuing the operation.
The switch is located lower mid way of the sensor bar at the blue mark.
- Tap on Bale Position 2 sensor bar switch until display number changes or replace
the sensor bar.
097 Bale Position 3 sensor bar switch stuck on.
Note: Before the machine will lower the Strap Guide Arms, it does a safety check on
the Bale Position 3 sensor bar switch. It checks to see if the sensor bar switch is stuck
on. If it is, it will wait until the sensor bar switch is off before continuing the operation.
The switch is located at the bottom of the sensor bar at the yellow mark.
- Tap on Bale Position 3 sensor bar switch until display number changes or replace
the sensor bar.
Summary of Contents for GFC 100
