Baldor NXE100-1608Dx, Installation Manual

Page: 11 / 114

www.baldormotion.com
Introduction 2-3 MN1941
2.2 Receiving and inspection
When you receive your NextMove e 100, there are several things you should do immediately:
1. Check the condition of the packaging and report any damage immediately to the carrier that
delivered your NextMove e 100.
2. Remove the NextMove e 100 from the shipping container and remove all packing material. The
container and packing materials may be retained for future shipment.
3. Verify that the catalog number of the NextMove e 100 you received is the same as the catalog
number listed on your purchase order. The catalog/part number is described in the next
section.
4. Inspect the NextMove e 100 for external damage during shipment and report any damage to
the carrier that delivered it.
5. If the NextMove e 100 is to be stored for several weeks before use, be sure that it is stored
in a location that conforms to the storage humidity and temperature specifications shown in
section 3.1.1.
2.2.1 Identifying the catalog number
Different models of NextMove e 100 are available. As a reminder of which product has been
installed, it is a good idea to write the catalog number in the space provided below.
NextMove e 100 catalog number:
NXE100-16___D_ or NXE100-16___S_
Installed in:
________________________
Date:
______
A description of the catalog numbers are shown in the following table:
Catalog number Description
NXE100-1608D x 8 axes, RS422 differential stepper outputs.
NXE100-1608S x 8 axes, open collector (single-ended) stepper outputs.
NXE100-1612D x 12 axes, RS422 differential stepper outputs.
NXE100-1612S x 12 axes, open collector (single-ended) stepper outputs.
NXE100-1616D x 16 axes, RS422 differential stepper outputs.
NXE100-1616S x 16 axes, open collector (single-ended) stepper outputs.
Note: The x represents a letter indicating the hardware revision. This does not affect the
capabilities of the NextMove e 100 unless otherwise stated.