Bailey 40 Series, Hardware Manual

Page: 64 / 103

INTRODUCTION
I-E96-192-5A 6 - 1
SECTION 6 - COMPONENT DESCRIPTION AND REPLACEMENT
INTRODUCTION
This section provides a description of components and
explains how to replace the components in the OIC console. It
contains jumper and dipswitch settings and also component
locations and settings. There are no special tools required.
Components in the OIC consoles are configured at the factory.
This information is given in case settings are changed or hard-
ware needs to be replaced.
Table 6-1 lists the hardware used in the OIC operator inter-
faces that are covered in this section.
IIMKM02A MULTIBUS KEYBOARD MODULE
The multibus keyboard module interfaces the keyboard and
other operator input devices to the OIC console. The location of
the module varies depending on which type of OIC is being
used. There are six jumpers on the MKM board to set for
proper operation (Figure
6-1 ).
Table 6-1. Hardware
Nomenclature
or Part Number
OIC Model Description
Hardware Description
421 422 423 424
1948623A9 x x x x 19-inch color monitor
6638353A7 x Power entry panel
6638514A1 x x x x Keyboard assembly
(
mylar
)
6638553A5 x Power supply assembly
6638554A2 x x x keyboard interface assembly
6639030A5 x keyboard interface assembly
6639503A5 x
1
Power entry panel
6640038A1 x x x Power supply
6640300A1 x Four slot multibus card cage
6640851A2 x 1 Power entry panel
IIADP01 x x x Annunciator/display panel (tabletop - optional)
IIADP02 x x Annunciator/display panel
IIAKB04 x x x
2
x QWERTY engineering keyboard
IIAMS04 x x x Mouse
IIATB05 x x x Trackball
IIMKM02A x x x x Multibus keyboard module
NADS03 x Annunciator display panel
NOTES:
1. Includes keyboard interface assembly.
2. IIOIC423 requires an IIAKB04 without the adapter.