INSTALLATION
UNPACKING AND INSPECTION
3 - 2
I-E96-192-5A
®
6.
Use An Antistatic Field Service Vacuum
. Remove dust
from the cards if necessary.
7.
Use a grounded wrist strap
. Connect the wrist strap to
the appropriate grounding plug on the power entry panel. The
grounding plug on the power entry panel is connected to the
cabinet chassis ground.
8.
Do not use lead pencils to set dipswitches
. To avoid
contamination of switch contacts that can result in circuit
board malfunction, do not use a lead pencil to set a dipswitch.
UNPACKING AND INSPECTION
Follow these steps for general handling:
1. Examine the console to make sure that no damage has
occurred in transit.
2. Notify the nearest Elsag Bailey sales office of any damage.
3. File a claim for any damage with the shipping company
that handled the shipment.
4. Use the original packing material or container to store the
console.
5. Store the console in a place with clean air; free of extremes
of temperature and humidity. Refer to
for the console
specifications.
Do not remove or install circuit boards with power applied to
the console. The circuit board may be damaged. Remove power
to all AC wiring when removing or connecting AC wires to pre-
vent personal injury and equipment damage. Remove DC
power to all DC wiring when removing or connecting DC wires
or circuit boards to prevent personal injury and equipment
damage.
WARNING
Verify all covers are installed and all doors are closed before
operating the console. Exposed electrical connections present
a shock hazard that can cause injury or death.
AVERTISSEMENT
Assurez-vous que tous les couvercles sont installés et toutes
les portes fermées avant de faire fonctionner la console.
L´exposition à des connexions électriques presénte un risque
de blessure ou d´électrocution fatale.
