![background image](http://html1.mh-extra.com/html/bailey/40-series/40-series_hardware-manual_3458780035.webp)
INSTALLATION
OIC INSTALLATION
3 - 12
I-E96-192-5A
®
IIOIC422 Console Wiring Connections and Cabling
The IIOIC422 console is internally wired when it is shipped.
Connect the AC power and any peripheral devices. Refer to
for specific instructions on installing and configuring
replacement components.
1. Wire AC power to the proper terminals of the power entry
panel. Refer to Figure
for AC input terminal location.
NOTE: Verify that the incoming voltage meets the rating on the label
of TB1.
2. Connect only 120/240 VAC at 50/60 hertz into the termi-
nal block on the power entry panel.
Figure
shows the IIOIC422 cable connections. The circled
numbers represent the cables. Table
contains the list of
those cables and connection descriptions.
NOTE: If remote monitors are being installed in the OIC console, be
sure they are powered using the same power source and ground as
the OIS and OIC console to reduce the chance of communication
problems on the network. Failure to do so may cause data to be
changed or lost.
Figure 3-7. IIOIC422 Console 45 Degree Wedge Dimensions
50.8
2.00
493.8
19.44
TP35320B
615.4
24.23
254.5
10.02
956.6
37.66
395.7
15.58
482.6
19.00
1089.7
42.90
IICPI02
DIMENSIONS
MILLIMETERS
INCHES
482.6
19.00
791.5
31.16
885.2
34.85