![background image](http://html1.mh-extra.com/html/backyard-products/shedmaster-homestead/shedmaster-homestead_assembly-manual_3358441050.webp)
48
TOP VIEW
DOOR HARDWARE
PARTS REQUIRED:
x4
Re-drill hole with 1/2" drill
(Fig. B)
.
Keep drilled hole square to trim to avoid breaking edge of 1-1/2" x 2-1/2" door stiffener.
BEGIN
1
2
Measure and mark location of hole on outside of right door as shown
(Fig. A)
. Pre-drill hole with 1/4" drill.
1-3/4"
(4,4 cm)
1/4" Pre-drill and
1/2" Drill-through
Fig. A
1/2" (13 mm) Drill Bit
1/4" (6 mm) Drill Bit
3/4" (1,9 cm)
x12
Install decorative hinges on horizontal trim and flush against hinge.
3
1-3/4"
(4,4 cm)
35-3/4"
(90 cm)
RIGHT DOOR.
1/2"
(1,3 cm)
SIDE VIEW
Fig. B
Screws
3/4"
(1,9 cm)
x12
x1
1-1/2" (3,8 cm)
SET
SCREW
You have now installed your T-handle and decorative hinges.
Install inside handle and secure with set screw.
5
Insert handle in hole and secure with 1-1/2" screws.
4