![background image](http://html1.mh-extra.com/html/backyard-products/shedmaster-homestead/shedmaster-homestead_assembly-manual_3358441024.webp)
22
BACK WALL INSTALLATION
2
Secure back wall panel to side wall
with (1) 2" screw into side wall top and
bottom plate
(Fig. A, Fig.B)
.
2" (5,1 cm)
x23
2" (5,1 cm)
x2
PARTS REQUIRED:
ENSURE TOP OF WALL FRAMES ARE FLUSH.
BEGIN
Center back wall assembly on the 120" (304,8 cm) floor dimension.
Ensure the 1" (2,5 cm) wall panel overlap is to the bottom.
1
3" (7,6 cm)
x1
x13
1-1/2" (3,8 cm)
1"
(2,5 cm)
DOOR
Flush
2"
(5,1 cm)
Screw
Fig. B
Fig. A
2"
(5,1 cm)
Screw
3
3
Nail lower edge of wall panels to floor with
2" nails spaced 6" apart.
Angle nails into floor frame
(Fig. C)
.
Nail back wall panel to side wall stud with
1-1/2" nails spaced 6" apart.
Your back wall is now installed.
FINISH
Secure wall top plates with (1) 3" screw
angled at the corner
(Fig. D)
.
4
Secure back wall bottom plate to floor
with 3" nails
(Fig. C)
.
3" (7,6 cm)
x10
6"
(15,2 cm)
2" (5,1 cm)
Nails
1-1/2" (3,8 cm)
Nails
6" (15,2 cm)
Nail 2" nails first.
2" (5,1 cm)
Nails
3" (7,6 cm)
Nails
Fig. C
3" (7,6 cm)
Screw
Fig. D
3" (7,6 cm)
Nails
Flush