Baby Lock Ellisimo BLSO, Service Manual

Page: 18 / 65

Test Mode
4 - 4
14 Speed
Display target and actual rotation speed of upper
shaft.
-
15 Power
Running the machine with the maximum electric
power.
-
19 Clearing Memory/Clearing Counter
Embroidery and utility stitch count.
(Able to reset in maintenance)
-
22 NP Sensor Check upper shaft angle with buzzer ON/OFF. 4-12
23 Embroidery Max Position Trace the maximum size of embroidery. 4-32
24 LCD Check Check LCD. -
28 Threading Check Check the needle threading operation. 4-18
29 Input Check
Check switches and sensors function.
(+1: ON, 00: OFF)
4-5
32 VR AD Check
Display speed VR and foot controller AD value.
-
Display target and actual rotation speed of upper
shaft.
36 Side Feed Adjustment
Sewing side feed, 10 stitches right and left, and set
the correction value from the results of side feed
sewing.
4-25
42 Embroidery Position Adjust
Correct the initial position of embroidery by the 4
keys X direction (right and left) and Y direction (up
and down).
4-33
46 Error List
Display previous 10 error messages appeared on
the screen.
-
47 Z Initial Phase/F Initial Phase Check Check initial phase of Z-PM/F-PM. -
52 LED Check/Speaker Check Check LED/Speaker operation. -
53 Extended Unit Check (Use only production line.) -
54 Camera Calibration Camera calibration. 4-36
57 Range of Camera View Check Check range of camera view. 4-39
59 Camera calibration Check (Use only production line.) -
60 EEPROM USB HOST Write (Use only production line.) -
Test mode
No.
Mode Contents of test mode
Ref.
page
Start Test mode and Contents
20