Baby Lock Ellisimo BLSO, Service Manual

Page: 43 / 65

4 - 22
Adjustment Feed dog height and parallelism
[Adjustment standard]
When the feed dog is in highest position, feed dog height from needle plate A surface is 0.9 to 1.1mm. Feed dog
parallel with needle plate A.
[Adjustment procedure]
1. Remove the needle plate B, presser foot and needle.
2. Turn the pulley by hand to raise the feed dog to its highest position.
3. Turn the socket set screw (FT, M4x10) and adjust the back tooth of the feed dog is 0.9 to 1.1mm from needle plate
A surface. (Fig. 1)
4. Loose the socket bolt (M3x8), next to the feed adjuster. (Fig. 2)
5. Turn the socket set screw (FT, M4x10), adjust feed dog parallel with needle plate A. (Fig. 3)
6. Tighten the socket bolt (M3x8), next to the feed adjuster. (Fig. 2)
*Key point
• When adjusting the feed dog height, use the feed dog height gauge.
XC2278001 Feed dog height gauge
0.9 - 1.1mm
Feed dog highest position
Needle plate A
surface
1.5mm 1.5mm 17.2mm
20.2mm
Feed dog
height gauge
0.9mm
A (10 : 1)
A
1.1mm
Socket set screw
(FT, M4x10)
Socket set screw
(FT, M4x10)
Socket bolt (M3x8)
Fig. 1
Fig. 2
Fig. 3
45