Baby Lock Ellisimo BLSO, Service Manual

Page: 23 / 65

4 - 10
Adjustment Fine tension
[Adjustment standard]
Start test mode, pass the schappe spun thread #60 through tension plate and pull it by tension gauge, then adjust
tension must be in 0.04 to 0.05N (4 to 5g).
[Adjustment procedure]
1. Remove the front thread guard cover.
2. Start the test mode.
3. Raise the presser foot lever.
4. Pass the schappe spun thread #60 through the thread guide and then tension plate.
5. Lower the presser foot lever.
6. Pull thread by a tension gauge, and turn the power lock (2x3) and adjust tension to 0.08 to 0.11N (8 to 11g).
XA9153001 Tension gauge (0.3N)
Tension plate
Power lock 2x3
0.08 - 0.11N (8 - 11g)
Power lock 2x3
Loose Tight
25