![background image](http://html1.mh-extra.com/html/baby-lock/blta/blta_instruction-and-reference-manual_3271077065.webp)
STITCH SETTINGS
Se
wi
n
g Ba
sics
63
2
■
Upper Thread is Too Tight
If the bobbin thread is visible from the right side of the
fabric, the upper thread is too tight.
Press
, to loosen the upper thread.
■
Upper Thread is Too Loose
If the upper thread is visible from the wrong side of the
fabric, the upper thread is too loose.
Press
, to tighten the upper thread.
Saving Your Stitch Settings
The settings for the zigzag stitch width, stitch length,
thread tension, automatic thread cutting, automatic
reinforcement stitching, etc., are preset in the machine
for each stitch. However, if you have specific settings
that you wish to reuse later for a stitch, you can change
the settings so that they can be saved for that stitch. Five
sets of settings can be saved for a single stitch.
■
Saving Settings
a
Select a stitch.
b
Specify your preferred settings.
c
Press .
The settings are saved and the original screen
automatically appears.
■
Retrieving Saved Settings
a
Select a stitch.
b
Press .
c
Press the numbered key of the settings to be retrieved.
*
Press
to return to the original screen without
retrieving settings.
1
Numbered keys
d
Press .
The selected settings are retrieved, and the original
screen automatically appears.
■
Returning the Selected Stitch Pattern Saved
Settings to the Default Settings
a
Press .
b
Press .
Note
• If the bobbin thread was incorrectly threaded, the
upper thread may be too tight. In this case, refer to
“Setting the Bobbin” on page 40 and rethread the
bobbin thread.
1
Bobbin thread
2
Upper thread
3
Surface
4
Locks appear on
surface of fabric
Note
• If the upper thread was incorrectly threaded, the
upper thread may be too loose. In this case, refer
to “Upper Threading” on page 42 and rethread the
upper thread.
1
Upper thread
2
Bobbin thread
3
Wrong side
4
Locks appear on wrong
side of fabric
Memo
• To save new settings when there are already 5 sets
of settings saved for a stitch, press
. Press
the numbered key of the setting to be deleted.
Press
, press
and then
. The
new setting will be saved in place of the recently
deleted setting.
• You can delete all the saved settings by pressing
.
1
Summary of Contents for BLTA
