Baby Lock BLTA, Instruction & Reference Manual

Page: 160 / 204

STITCH SETTINGS SCREEN
158
Before creating the embroidery pattern, specify the stitch
settings. Lines of the design are embroidered with various
stitches and regions are embroidered with fill stitches or
stippling stitches. Stitching of the regions was already
selected in “Drawing Regions” on page 155, so specify
values of detailed settings.
After specifying the settings, press
to create the
embroidery pattern.
Specifying Individual Stitch Settings
Select a pattern in the stitch settings screen to specify its
line and region stitch settings. If multiple patterns are
selected, the settings are applied to those patterns.
■
Line Settings
1
Shows the stitch type and color for the selected line.
2
Shows the stitch settings for the selected line.
Line stitch settings
Select the type of stitching you want applied to your line
art, from zigzag stitch ( ), running stitch ( ), triple
stitch ( ), candlewicking stitch ( ) or chain stitch
( ).
Zigzag stitch
Running stitch /Triple stitch
* Both includes an under sewing.
Candlewicking Stitch
Chain stitch
■
Region Settings
1
Shows the stitch type and color for the selected region.
2
Shows the stitch settings for the selected region.
Fill stitch settings
Stippling stitch settings
Decorative fill stitch settings
STITCH SETTINGS SCREEN
Zigzag width Specifies the width of the stitch.
Density Specifies the density of the stitch.
Run pitch
Specifies the length of the stitch.
1
2
Size
Increases/reduces the size of the stitch.
Spacing
Specifies the spacing of the stitch.
Size Increases/reduces the size of the stitch.
Repetition
Sets repeated embroidering at the same
part.
Direction
Specifies the embroidering direction. Select
to change to the desired direction of
fill stitch.
Density
Specifies the stitch density of fill stitch.
Pull
compensation
Specifies to correct the shrinkage of the
pattern by slightly shortening or lengthening
the stitching. Change the setting after you
embroider the pattern and can check the
shrinkage.
Under
sewing
Select if you need or do not need the under
sewing for the stabilized fabric.
Run pitch
Specifies the length of a stitch of the
stippling stitch.
Spacing
Specifies the spacing between the stitches
when embroidering the stippling stitch.
Distance Specifies the offset from the pattern outline.
Size Increases/reduces the size of the pattern.
Direction Specifies the rotation angle of the pattern.
Outline
Select whether [ON] or [OFF] the outline is
also converted to embroidery data. If [ON] is
selected, the number of thread jumps can be
reduced.
1
2