![background image](http://html1.mh-extra.com/html/baby-lock/blta/blta_instruction-and-reference-manual_3271077186.webp)
ERROR MESSAGES
184
19
OK to cancel the current stitch selection?
This message is displayed when, after selecting a stitch pattern,
,
, or
is pressed and the stitch pattern is
about to be deleted.
20
OK to delete the selected picture?
This message is displayed when the image is deleted.
21
OK to delete the setting?
This message appears when
or
is pressed to delete the
settings for a utility stitch. To delete the selected settings, press
.
22
OK to move the embroidery carriage to its previous
position?
This message is displayed when replacing the embroidering bobbin thread.
23
OK to recall and resume previous memory?
This message appears if the machine is turned off while embroidering, then
turned on again. Press
to return the machine to the condition (pattern
position and number of stitches) when it was turned off. Follow the
procedure described in “If the Thread Breaks or the Bobbin Runs out of
Thread During Embroidering” on page 133 to align the needle position and
embroider the remainder of the pattern.
24
OK to revert to previous color changes?
This message is displayed when
is pressed when changing thread
colors.
25
OK to separate the combined border pattern?
This message is displayed when rotating a saved combined pattern in the
embroidery screen.
26
Pattern extends to the outside of embroidery frame.
This message is displayed when the machine is in embroidery mode, and the
character pattern combination is too large to fit in the embroidery frame.
27
Pattern extends to the outside of embroidery frame.
If you plan to add more patterns, rotate the pattern
combination.
This message is displayed when the machine is in embroidery mode and the
combined character pattern is too large for the embroidery frame. You can
rotate the pattern 90 degrees and continue combining characters.
28
Preventive maintenance is recommended.
This message is displayed when the machine needs to be maintained.
Once this message appears, it is recommended to take your machine to an
authorized Baby Lock retailer for a regular maintenance check. Although this
message will disappear and the machine will continue to function once you
press
, the message will display several more times until the
appropriate maintenance is performed.
29
Raise the buttonhole lever.
This message is displayed when the buttonhole lever is down, a stitch other
than a buttonhole is selected, and the “Start/ Stop” button,
(reverse
stitch button) or
(reinforcement stitch button) is pushed.
30
Remove Dual Feed module from the machine.
This message appears when you try to start embroidering with the dual feed
foot attached to the machine. Remove the dual feed foot before entering the
embroidery mode.
31
Remove Embroidery foot with LED pointer from the
machine.
This message appears when you try to start sewing utility stitches or
character/decorative stitches with the embroidery foot with the LED pointer
attached to the machine.
Remove the embroidery foot with the LED pointer before entering the sewing
mode.
32
Select a pattern.
This message is displayed when there is no embroidery pattern selected and
the “Start/Stop” button,
(reverse stitch button) or
(reinforcement
stitch button) is pressed.
33
Select a stitch.
This message is displayed when there is no stitch pattern selected and the
“Start/Stop” button,
(reverse stitch button) or
(reinforcement stitch
button) is pressed.
34
Set the clock.
This message appears when the time/date is not set. Set time/date.
(page 22)
35
The "Start/Stop" button does not operate with the
foot controller attached. Remove the foot controller.
This message is displayed when the “Start/Stop” button is pushed to sew
Utility stitches or Character/Decorative stitches while the foot controller is
connected. (This message does not appear when embroidering).
Error messages
Cause/solution
Summary of Contents for BLTA
