![background image](http://html1.mh-extra.com/html/baby-lock/blta/blta_instruction-and-reference-manual_3271077029.webp)
LCD SCREEN
G
etting
Re
ad
y
27
1
Using the Machine Settings Key
Press
to change the default machine settings
(needle stop position, embroidery speed, opening
display, etc.). To display the different settings screens,
press
for “Sewing settings”,
for “General
settings”,
for “Embroidery settings” or
for
“Wireless LAN settings”.
■
Sewing Settings
1
Select whether to use the sewing speed controller to
determine the zigzag width (page 79).
2
Make adjustments to character or decorative stitch
patterns (page 97).
3
Adjust the presser foot height. Select the height of the
presser foot when the presser foot is raised.
4
Adjust the presser foot pressure. The higher the number,
the greater the pressure will be. Set the pressure at [3]
for normal sewing.
5
Adjust the amount of fabric feeding of the dual feed foot
(page 53).
6
Select whether [1-01 Straight stitch (Left)] or [1-03
Straight stitch (Middle)] is the utility stitch that is
automatically selected when the machine is turned on.
7
Select whether utility stitches
or quilting stitches
are displayed first on the stitch selection screen.
8
You can activate this setting after connecting the multi-
function foot controller (sold separately). (These settings
appear when the multi-function foot controller is
connected to the machine.)
9
Select the height of the presser foot when sewing is
stopped when the pivot setting is selected (page 65).
0
Select the height of the presser foot when the machine is
set to free motion sewing mode (page 80).
A
When set to [ON], the thickness of the fabric is
automatically detected by an internal sensor while
sewing. (page 67)
B
When set to [ON], reinforcement stitches are sewn at the
beginning and/or end of sewing for a reinforcement
stitch pattern, even when
(Reverse stitch button) is
pressed (page 59).
C
Adjust the guideline marker position and brightness
(page 65).
D
Select whether to lower the presser foot automatically
before starting sewing. (page 61)
E
Select whether to raise the presser foot automatically
when stopping sewing. (page 61)
F
Select whether pressing
(Thread cutter button)
automatically lowers the presser foot before cutting the
thread. The presser foot will be raised after the thread is
cut. (page 61)
G
You can save the current settings screen image in a USB
media by pressing this button when the USB media is
inserted into the USB port. The files are saved in a folder
labeled [bPocket].
H
Reset settings on this page to original default. Some
settings are not reset.
Memo
• Press
or
to display a different settings
screen.
1
2
3
4
5
6
8
7
H
A
B
C
9
0
G
D
E
F
Controller
Functions that can be specified
Main foot controller
Start/Stop
Heel switch
Select any of the following:
• [Thread Cutting]
• [Needle Position Up/Down]
• [Single Stitch]
• [Reverse Stitch] (Reinforcement
Stitch)
• [Presser Foot Up/Down]
• [No setting]
Side pedal
Summary of Contents for BLTA
