Baby Lock BLTA, Instruction & Reference Manual, Page: 115 / 204

EDITING PATTERNS
113
B
asic
E
m
br
oi
der
y
4
Changing the Size and the Density of the
Pattern
If is selected, you can change the pattern size
while maintaining the thread density. The machine
recalculates the stitch density automatically. With this
function, the pattern will be enlarged or reduced at a
larger ratio than with normal pattern resizing.
a
Select in the size window.
* : Change the pattern size while maintaining
the number of stitches. The thread density for the
pattern increases or decreases.
* : Change the pattern size while maintaining
the thread density. After the pattern size is changed,
the thread density can be changed in the edit screen.
The number of stitches is recalculated depending on
the pattern size.
b
Select the direction in which to change the pattern
size.
c
When you select in step
a
, press , and
then press to change the thread density.
* : Make the pattern less dense.
* : Make the pattern more dense.
d
Press .
Creating Repeated Patterns
Using the border function, you can create repeated
patterns. You can also adjust the spacing of the
patterns.
a
Press , and then press .
b
Select the direction in which the pattern will be
repeated.
* : Repeat the pattern above.
* : Repeat the pattern below.
* : Delete above pattern.
* : Delete below pattern.
Vertical direction
1
Repeating and deleting keys
2
Spacing keys
3
Key to cancel pattern repeating
Note
• This function cannot be used with alphabet
character patterns, frame patterns, repeated
patterns or buttonhole patterns.
• Patterns with a large number of stitches (100,001
or more) cannot be resized while maintaining a
thread density.
Memo
• Depending on the pattern, the size of the pattern
increases up to 200% or reduces to 60%.
• You can also change the size by dragging the red
point at the sides and corners of the pattern.
2
1
3