![background image](http://html1.mh-extra.com/html/baby-lock/blta/blta_instruction-and-reference-manual_3271077175.webp)
CARE AND MAINTENANCE
173
A
ppe
ndi
x
7
*
Make sure that the indicated points are aligned
before installing the bobbin case.
i
Insert the tabs on the needle plate cover into the
needle plate, and then slide the cover back on.
j
Reattach the bobbin cover.
Cleaning the Bobbin Case
Thread wax and dust easily collect around the notch in
the tension spring on the bobbin case, resulting in an
incorrect thread tension. Therefore, the bobbin case
should be cleaned as necessary should tension
problems arise.
When cleaning the bobbin case, use card stock or
another type of paper of similar thickness and sturdiness
in order to prevent pieces of paper tearing off and
getting lodged in the bobbin case.
a
Follow steps
a
to
f
in “Cleaning the Race” to
remove the bobbin case.
b
Using a piece of paper of adequate thickness and
sturdiness, slide the paper between the tension plate
base and the tension spring and also slide the paper
behind the notch of the spring to remove any dirt or
dust.
c
Use the cleaning brush to remove any lint and dust
from inside the bobbin case.
d
Replace the bobbin case and needle plate cover.
1
Tension plate base
2
Notch
3
Paper (e.g. business card type)
4
Tension spring
Cleaning the Cutter in the Bobbin Case Area
The cutter below the needle plate should be cleaned. If
dust or lint accumulate on the cutter, it will be difficult
to cut the thread when
(Thread cutter button) is
pressed or the automatic thread cutting function is used.
Clean the cutter when the thread is not easily cut.
a
Follow steps
a
through
e
in “Cleaning the Race” to
remove the needle plate cover.
b
Use the screwdriver included with the machine to
unscrew and remove the needle plate.
c
Use the cleaning brush or a vacuum cleaner to remove
any lint and dust from the cutter in the bobbin case
area.
1
Cutter
d
Align the two screw holes in the needle plate with the
two holes at the needle plate mounting base, and then
fit the needle plate onto the machine.
CAUTION
• Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or machine
performance may suffer. For a new bobbin
case, contact your nearest authorized Baby
Lock retailer.
• Be sure that the bobbin case is correctly
installed, otherwise the needle may break.
Memo
• Do not bend the tension spring. In addition, do not
use anything other than recommended paper to
clean the bobbin case.
CAUTION
• Do not touch the cutter, otherwise injuries
may result.
a
Summary of Contents for BLTA
