PT-6IL
MAINBOARD
HARDWARE SETUP
7
A.
INSTALL THE BOXED PENTIUM™ II PROCESSOR
Before you can installation of the Pentium™ processor onto the mainboard, you may
need to refer to the integration issues “ Integration Notes for the Boxed Pentium™ II
Processor” document #1608, it provides all detail information and will assist you in
understanding all the issues. The document is available from FaxBack* ( see “Intel
Customer Support FaxBack* service” on page 6 ) and the World Wide Web (
support.intel.com ).
The following section describes the BOXED PENTIUM™ II PROCESSOR installation
procedures. (This section is excerpted from the “Boxed Pentium™ II Processor
Installation Notes”, which comes with Pentium™ II Processor in the packing box,.
Some languages are also included in the document, please refer to the installation notes
and find the language which you prefer to read. )
1.
The Intel boxed Pentium™ II processor includes the following items:
l
The processor with fan heat sink attached.
l
One heat sink support set containing two black plastic pets and two black
plastic supports. ( see page 3-2)
l
One power cable for CPU fan heat sink
2.
Mount the two black plastic pegs onto the mainboard. These pegs will be used to
attach the fan heat sink supports. Notice that one hole and the base of one peg are
larger than the other hole and pet base. Push each peg into its matching hole firmly
until you hear it “click” into place.
