PT-6IL
MAINBOARD
INSTALLATION
1
I.
INSTALLATION
A.
UNPACKING
The mainboard contains the following components in the package. Please inspect the
following contents and confirm that everything is there in the package. If anything is
missing or damaged, call your supplier for instructions before proceeding.
l
One PT-6IL mainboard.
l
One USER‘S MANUAL.
l
One Cable set for IDE and Floppy devices.
l
One Pentium™ II Processor Retention Mechanism (RM).
l
One CD diskette for IDE Bus Master Drivers and Virtual Drive programs.
The PT-6IL mainboard contains electrostatic sensitive components and it can be easily
damaged by static electricity. So please leave it sealed in the original packing until
when installing.
A grounded anti-static mat is recommended when unpacking and installation. Please
also attached an anti static wristband to your wrist and have it grounded to the same
point as the anti-static mat.
After the opening of the mainboard carton, please observe the mainboard carefully to
make sure there is no shipping and handling damage before you can install the
mainboard to the system.
Having finished all the procedures above, you are now ready to install the mainboard to
the chassis. Please make sure that the chassis is the ATX type so that the mounting hole
will match with the PT-6IL mainboard.
A.
POWER ON THE PC SYSTEM
When the PT-6IL mainboard has been assembled in a system successfully , there are
several ways to power on the system. Please read the following description for all the
details.
