PT-6IL
MAINBOARD
HARDWARE SETUP
5
RMAM
RM
HSSB
HSSP
HSSTB
(1)
Retention Mechanism (RM)
: Plastic guide with captive nuts that hold the
Pentium™ II Processor in the Slot1 connector.
(2)
RM Attach Mount (RMAM)* : Bolt/Bridge assemblies inserted up through the
bottom of the mainboard. RM secures to RMAM.
(2 RMAM required per RM.)
(* Usually, they are installed by the manufacturer)
(3)
Heat Sink Support Base (HSSB) :Plastic support bar mounted to the mainboard
under the OEM heat sink. (Doesn’t need for
Boxed Pentium™ II Processor)
(4)
Heat Sink Support Pin (HSSP) : Plastic pins inserted through the HSSB to secure
it to the mainboard (2 required per assembly,
(Doesn’t need for Boxed Pentium™ II Processor).
(5)
HSS Top Bar (HSSTB)
: Plastic bar that clips onto the HSSB through the
pins on the OEM heat sink. (Boxed Pentium™ II
Processor does not need HSS)
A.
INSTALLING RETENTION MECHANISM KIT
Before you can install the Pentium™ II Processor onto the PT-6IL mainboard, the
Retention Mechanism (RM) kit must be installed on the mainboard first, please refer
to the following steps to install the RM kit.
1.
Fetch the PT-6IL mainboard and the Retention Mechanism (RM) from the packing
box and place them on a workbench (not in a chassis).
