PT-6IL
MAINBOARD
INTRODUCTION
5
¥
HARDWARE MONITORING
(optional)
LM78 or LM79 is designed on the board to monitor hardware healthy status like
system voltages, system temperature, and three cooling fan speed. When the CPU is
over heated, the system speaker will gives beeping alarm to so that you can take
proper action to prevent damage to your system. When you hear the beeping alarm,
be sure to turn the power off and open the chassis immediately, check on the
cooling fans (especially the CPU cooling fan ) to see whether it is working properly
or not. If you don’t know how to handle it, send the PC system to your dealer for
technical support.
¥
ACPI
Advanced Configuration and Power Interface (ACPI) function is strongly
recommended by PC‘98: Followings are the ACPI features designed on the board:
1.
On Now: power on the system by panel-switch, Keyboard, PS/2™ Mouse,
Modem ring-in, RTC alarm or LAN signal.
2.
Power off (soft-off) by OS or Panel-switch.
3.
CPU cooling fan auto-off during Suspend state.
4.
Resuming of PC system. (such as Modem ring-in, RTC alarm, .... etc.)
5.
Supports Full-On/Doze/Standby/Suspend operating modes.
¥
JUMPER FREE
In order to provide a most convenient way to help users to install the CPU onto the
mainboard, PT-6IL has the Jumper-free feature designed on the board, There is no
“jumper setting” required to select the CPU speed and CPU Core voltage. (CPU
speed is selected by CMOS setup, please refer to page 4-7
for details )
¥
DIMENSION
1.
Width & Length
:
305 mm x 186 mm.
2.
Height
: 2 1/2 inches with CPU Retention Mechanism.
3.
PCB Thickness
:
4 layers, 0.05 inches normal.
4.
Weight
: 18 ounces.
¥
ENVIRONMENT LIMIT
1.
Operating Temperature :
10 to 40 . (50 to 104 )
2.
Required Airflow : 50 linear feet per minute across CPU.
3.
Storage Temperature: - 40 to 70 . (- 40 to 158 )
4.
Humidity
: 0 to 90% non-condensing.
5.
Altitude
: 0 to 10,000 feet.
