PT-6IL
MAINBOARD
HARDWARE SETUP
12
A.
INSTALLING OEM PENTIUM™ II PROCESSOR
Before you can install the OEM PENTIUM™ II PROCESSOR onto the mainboard,
you have to install the OEM fan and heat sink onto the Processor first. Please install
the OEM fan and heat sink by following the manufacture’s instructions. If there is no
Installation instructions, please inquire to your fan and heat sink supplier before
proceeding. Please refer to page 3-4 for the detail of the required parts when installing
OEM PENTIUM™ II PROCESSOR,
.
1.
Mount the Heat Sink Support Base (HSSB) onto the mainboard. The HSSB will be
used to attach the OEM fan and heat sink. Notice that the HSSB has two pegs, one
peg is larger than another one. Push each peg into the appropriate hole firmly until
you hear it “click” into place.
Retention mechanism
Large peg
and hole
HSSB