PT-6IL
MAINBOARD
AWARD BIOS SETUP
7
However, “60ns” is recommended in most case causes it works with most DRAM
modules.
When “Auto Configuration” is “Enabled”, the “DRAM speed selection” field will be
disappeared and you may use the other fields to configure the DRAM speed. Basically,
it is not recommended unless you are the professional technician.
Memory Hole at 15M-16M : (
default setting : “Disabled” )
Some specific add-on cards may require a 1MB address space between 15MB and
16MB area. Please refer to the user’s manual of your add-on card carefully to see
whether you will have to enable this field or not when you are installing a add-on card
to the system..
AGP Aperture Size (MB) : (
default setting: 4MB )
There is the AGP slot on the board and which allows user to install the AGP display
card in the system. The AGP display card will use some of the system memory to store
3D texture mapping data so that the video performance can be increased tremendously.
You may use this field to define the memory size which you prefer to use with the AGP
card. The memory size selectable in this field can be 4MB to 256MB.
CPU Speed : (
default setting : 266MHz )
PT-6IL is “Jumper-free” mainboard, so users need not to do any jumper setting when
installing the CPU. Simply use this field to decide the CPU speed. The selecting range
in this field is 233MHz to 333MHz. The default setting of CPU speed is “266MHz”,
In order to make sure the system will always working normally. So the CPU speed will
be switched to “233MHz” after you clear the CMOS data when you found the CMOS
data is corrupted.
