PT-6IL
MAINBOARD
HARDWARE SETUP
9
the heat sink support and that the alignment notch in the processor fits over the plug
in Slot1. Push the processor down firmly, with even pressure on both sides of the
top, until it is seated.
A
B
C
6.
Slide the clips on the supports (D) forward until they click into place to hold the
pegs securely. (Apply slight pressure on the peg and push the peg toward the clip
while pushing the clip forward.) Push the latches on the processor (E) outward until
they click into place in the retention mechanism. The latches must be secured for
proper electrical connection of the processor.
7.
Attach the small end of the power cable (F) to the three-pin connector on the
processor, then attach the large end to the three-pin connector on the mainboard.
Consult the mainboard documentation to find the connector.
