OS
/2
Section 6: Setting Up - OS/2
AXIS 5600+ User’s Manual
68
Section 6 Setting Up - OS/2
Having connected the AXIS 5600+ to your network, as described in
Connecting a printer to the Ethernet Network
, on page 19, this section
now describes how to set up your AXIS 5600+ for printing in the
OS/2 environment.
Continue with the instructions presented in the table below:
If you intend to operate your AXIS 5600+ in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual:
Section 5 Setting Up - NetWare
, on page 54
Section 4 Setting Up - Windows
, on page 34
Section 7 Setting Up - Macintosh
, on page 74
Section 8 Setting Up - UNIX
, on page 80
Printing
protocol
See ...
TCP/IP
TCP/IP Printing, on page 69
NetBIOS/NetBEUI
NetBIOS/NetBEUI Printing, on page 70
