Ne
tW
ar
e
AXIS 5600+
User’s Manual
Section 5: Setting Up - NetWare
55
Setup using NDPS
The AXIS 5600+ supports Novell Distributed Print Services (NDPS),
which is Novell’s new generation architecture for printing and printer
administration. You can run NDPS over Pure IP (TCP/IP) or
IPX/SPX.
Before the AXIS 5600+ can be installed, make sure that NDPS is
installed and a Broker is loaded on your NetWare file server.
AXIS 5600+ uses the AXIS NDPS Gateway for printing in networks
using either IP or IPX as transport protocols. The printer gateways are
included with the NDPS software (from version 5.1 and up) and are
automatically installed together with NDPS.
Notes:
❏
NDPS requires that you run NetWare 4.11 or higher.
❏
Pure IP is only supported by NetWare 5 or higher.
Installing the AXIS 5600+ in an NDPS environments
Having assigned an IP address to the AXIS 5600+ as described in
Assigning an IP address
, on page 23, you are now ready to install the
AXIS 5600+ for NDPS printing. You can select to install the
connected printers as public or controlled access printers. Follow the
instructions below to install the AXIS 5600+ using NDPS:
Notes:
❏
The
HP-JETADMIN
parameter of the AXIS 5600+ must be set
to
YES
in order for the communication between the AXIS 5600+
and the NDPS gateway to be enabled.
❏
If you do not have an NDPS Manager object available, start out
with creating one in the NetWare Administrator.
