Ne
tW
ar
e
Section 5: Setting Up - NetWare
AXIS 5600+ User’s Manual
56
Public Access
To create a public access printer using the NDPS Manager object in
your NetWare administrator, do the following:
1. Double-click on the NDPS Manager object you will be using to
control the Printer Agents.
2. At the Identification page for the NDPS Manager, click the
printer
Agent List
button. The
Printer Agent List
dialog will
appear.
3. Click
New
. The
Create Printer Agent
dialog will appear.
4. Type a name of your choice in the
NDPS Printer Agent
field.
5. Choose the Axis Gateway configuration in the
Gateway Type
window. Select TCP/IP or IPX as transport protocol. (See Note
below).
6. Click
OK.
7. Once you have completed the required tasks, you are ready to
print in your NDPS environment. Use the Novell Print Manager
to install the Public Access Printer on the client workstation.
Notes:
❏
The Public Access print servers are immediately available for
everyone on the network.
❏
The Axis Gateway Configuration Utility is an installation and
configuration tool for NDPS printers in the NetWare
environment. The Axis Gateway will appear in NetWare 5.1 and
later releases. To use the Axis Gateway with earlier versions of
NetWare, you can download the Axis Gateway Configuration
Utility from www.axis.com.
❏
To print using TCP/IP, Axis print server firmware 6.1 or later is
required. In order to print using IPX/SPX, Axis print server
firmware 5.51 or later is needed.
Controlled Access
1. Make sure that the HP NDPS Gateway is
not
configured to
automatically create a public access printer, before you connect
the AXIS 5600+ to the network.
