Ne
tW
ar
e
UNIX
Wi
n
d
ow
s
OS
/2
Ma
ci
ntosh
Section 12: Test Button
AXIS 5600+ User’s Manual
144
Section 12Test Button
The test button is located on the front right hand side of the AXIS
5600+ and is used for:
•
Printing a test page, checking the connection to the printer.
•
Printing a parameter list, showing the AXIS 5600+ current
settings.
•
Resetting the AXIS 5600+ parameters to the factory default
settings.
The Test Page
Press the test button once to print a test page. If the test page prints,
the parallel interface is functioning correctly. The printed Test Page
contains basic information about the AXIS 5600+. It is recommended
that you print a test page every time you have connected the AXIS
5600+ to a printer.
Note:
❏
The test page is printed on LPT1 by default. If you want to print
the test page on LPT2 or COM1 instead, you should set the
Internal Printout Destination
parameter to
LPT2 respectively
COM1
.
The Parameter List
Press the test button twice to print a parameter list showing the
current AXIS 5600+ settings. This list provides comprehensive details
of all the parameters and their current status. Refer to
13 - The Parameter List
, on page 146.
If you want to change any of the parameters, use one of the methods
that are described in
Section 9 Management & Configuration
, on page 96.
Note:
❏
The parameter list is printed on LPT1 by default. If you want to
print the parameter list on LPT2 or COM1 instead, you should
set the
Internal Printout Destination
parameter to
LPT2
respectively COM1
.
