manualshive.com logo in svg

Axis 5600+, User Manual

Share
Download
Axis 5600+ User Manual Download Page 157

Ne

tW

ar

e

UNIX

Wi

n

d

ow

s

OS

/2

Ma

ci

ntosh

 

AXIS 5600+

 

User’s Manual

Section 14: Technical Specifications

 

157

 

Logical Printers

The logical printer ports can be programmed to perform auto ASCII 
to PostScript conversion, string before and after job, string 
substitution, alternative output and character set conversion.

Parallel Printer

Two IEEE 1284 compliant high-speed parallel ports with 25-pin 
DSUB connectors. s. Sustained throughput over 1 Mbyte/s using 
NetWare. Bi-directional support for Apple, Reverse Telnet, PROS. 
ECP support.

Serial Printer

One serial port, RS 232, 9-pin DSUB connector. XON/XOFF or 
RTS/CTS. Data rates up to 115,200 baud.

Front Panel

2 LED indicators: Power and Network.
Test button for information printouts.

Power Consumption

Power provided by external supply:

Maximum 450 mA at 12 VDC. (Type PS-D, 12V, 800 mA).

Dimensions

Height x Width x Depth

1.1 x 6.3 x 5.1 inches (2.9 x 16.0 x 12.9 cm)

Weight

0.64 lb. (0.28 kg)

Environmental

Temperature: 40 - 105° F (5 - 40° C).
Humidity: 10 - 95% non-condensing.

Approvals

EMC:

EN 55022/1994, EN50082-1/1992. FCC Class A. 

Safety:

EN 60950. 

Summary of Contents for 5600+






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands