manualshive.com logo in svg

Axis 5600+, User Manual

Share
Download
Axis 5600+ User Manual Download Page 155

Ne

tW

ar

e

UNIX

Wi

n

d

ow

s

OS

/2

Ma

ci

ntosh

 

AXIS 5600+

 

User’s Manual

Section 14: Technical Specifications

 

155

 

Section 14Technical Specifications

Supported Systems

Novell NetWare:

Versions 3.11, 3.12, 4.10 and above, supporting both NDS and 
Bindery Emulation. A maximum of 16 bindery file servers and 96 
print queues can be served. 
NDPS supported by versions 4.11 and above.
NetWare5 and Pure IP supported.
User messages are also supported. 
Print Methods: RPRINTER/NPRINTER, PSERVER, NDPS.

Microsoft LAN Manager:

LAN Manager 2.0c and above, running under OS/2 ver 1.3 and 
above.

IBM LAN Server:

LAN Server 1.3 and above, running under OS/2 ver 1.3 and above 
including OS/2 Warp, OS/2 Warp Connect.

Microsoft Windows:

Windows NT ver. 3.5 and above, Windows 2000, Windows for 
Workgroups, Windows 95, Windows 98.

LANtastic

LANtastic 7.0, from any of the supported Windows clients, defined 
above.

All Operating Systems supporting the TCP/IP suite of protocols, 
including:

BSD Systems:

BSD 4.2, 4.3, 4.4, SunOS4 (Solaris 1.x), DEC Ultrix etc.

System V Systems:

R3, R4, AT&T, Interactive, SCO, SunOS5 (Solaris 2.x), HP-UX, 
IBM AIX, Silicon Graphics IRIX, DEC Alpha OSF/1, BULL (BOS, 
AIX).

Other Systems:

IBM (MVS, VM, VSE, OS/400), DEC VMS, guidelines for other 
systems.

Print Methods:

LPD, FTP, PROS (named pipe & filtered), Reverse Telnet, IPP.

Apple EtherTalk:

Print Method: AppleTalk Phase 2.

WWW:

Netscape Navigator 4.0 and higher and MS Internet Explorer 4.0 and 
higher.

Summary of Contents for 5600+






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands