AVT MAGIC AC1, Hardware & Software Manual

Page: 76 / 162

PAGE 76
W i n d o w s P C S o f t w a r e
5.7.2.3.3 Headset Interface
MAGIC DC7/AC1 provides a headset interface to connect a standard profes-
sional headset (e.g. beyerdynamic DT291 PV).
FIG. 42 CONFIGURATION OF THE HEADSET INTERFACE
Phones
Via the setting
Phones
you configure the Audio signal assignment of the
headphones.
• For all available signal sources Audio 1 Input , Audio 2 Input , Channel 1
Rx , Channel 2 Rx and Microphone Input you can decide if you want to
hear the signal - as soon as it is activated - either on both channels
(
Left+Right ) of the phones or only on the Left or Right channel of the
phones.
Reasonable applications are Live reports of commentators or translations
of interpreters: For example, the original signal of the speaker (e.g. via
Au-
dio 1 Input or Channel 1 Rx ) is available on the left channel and the inter-
preter’s own translated signal (e.g. via Microphone Input ) is available on
the right channel for checking purposes.
Microphone
Under Microphone you configure the microphone input of the headset inter-
face.
• If your microphone requires phantom power, you can activate it via the
option
Phantom Power
. A voltage of 12V is applied to the microphone
wires.
NOTE
The settings for the different signal sources apply only for transmissions in
Mono. During a Stereo transmission, the left channel is always available on
the left earphone and the right channel is always available on the right ear-
phone. The microphone signal is generally only available in Mono.