AVT MAGIC AC1, Hardware & Software Manual

Page: 39 / 162

PAGE 39
W i n d o w s P C S o f t w a r e
blinking in yellow : Incoming or outgoing call can be rejected or stopped.
Telephone book
By clicking on the Telephone book button, the phone book is opened. Details
can be found in CHAPTER 5.6.1 from Page 45.
Redialling
Via the Redialling function, the 10 most recently dialled calling numbers are
available. After pressing the key, a context menu is displayed with all existing
entries. Together with the calling number, the
Transmission Mode which
was used is also saved. If you want to call a displayed number with a different
transmission mode, you must re-enter the calling number and the desired
transmission mode.
With
Cancel
you can close the context menu without making a call.
Transmission mode
With
Transmission mode
you select the desired transmission parameters for
your connection, which you can set under
Transmission Modes
in the soft-
ware (see CHAPTER 5.7.2.2.1, page 64)
In the delivery status the following modes are displayed:
– Telephone
– 7 kHz (Auto)
– MPEG 1B (Auto)
– MPEG 2B (Auto)
If you configured your own transmission modes (see User Defined Trans-
mission Modes , CHAPTER 5.7.2.2.2, Page 68), these modes are also dis-
played if you click on the transmission mode button.
With
Cancel
you can close the context menu without changing the transmis-
sion mode.
When a connection is dropped, the system is automatically reset to the default
transmission mode, if you have set a default transmission mode under
Con-
figuration
→
MAGIC DC7/AC1
→
Transmission Modes
→
Default Au-
dio Mode
→
Mode
. If you have selected the option
Off
, the most recently se-
lected mode is activated.
NOTE
Further details about the transmission modes can be found in the chapter
„The Auto Dynamic Sync Procedure“ from Page 137.
TIP
You should select one of the Auto Modes as default transmission mode, since
only in this way you can be sure that the automatic synchronisation proce-
dure (
ADS ) is used when there is an incoming call.