AVT MAGIC AC1, Hardware & Software Manual

Page: 44 / 162

PAGE 44
W i n d o w s P C S o f t w a r e
Mixer Presets
In the system, up to three Mixer Presets can be saved and reloaded by a key-
press.
Please follow the instructions below:
– Adjust the Audio mixer for all Audio sources and output devices accord-
ing to your requirements.
– Press one of the
Mixer Preset
buttons for about two seconds. The dialogue
for the entry of a Preset Name is displayed. the length of the names must
not exceed 8 characters.
FIG. 17 ENTRY OF A PRESET NAME
– After the
OK
button is pressed, a confirmation is displayed that the
Mixer
Preset
has been saved successfully.
FIG. 18 MIXER PRESET SAVED
– To reload a mixer configuration, please click on the
Mixer Preset
button
for a second.
– To reset the system to the default settings, please click on the
SET DE-
FAULT
button. The mixer is configured in the following way:
• all levels to 0 dB
• Receive Channel 1
→
Audio Out 1
• Receive Channel 2
→
Audio Out 2
• Audio In 1
→
Send Channel 1
• Audio In 2
→
Send Channel 2
That means, the received signal is available at the Audio output and the
signal from the Audio input is transmitted to the remote side.
NOTE
The Mixer Presets apply to all Audio sources and output devices, even if they
are not displayed.