AVT MAGIC AC1, Hardware & Software Manual

Page: 30 / 162

PAGE 30
O p e r a t i o n v i a D i s p l a y a n d K e y p a d
To activate a Quick Dialling number just press from the main menu the de-
sired Quick Dial key for at least 3 seconds. The connection to the partner is
established automatically.
4.3.3 Working with Presets
The MAGIC DC7/AC1 differentiates between
System Settings
and
Operation
Settings
.
System Settings are settings that do not change during normal operation like
e.g. language, date/time etc. These parameters cannot be saved as Preset
since a configuration is usually only required when the system is put into op-
eration.
Operation Settings like e.g. the line interface ISDN or Analogue POTS, Ring-
ing Tone, etc., need to be reconfigured depending on the application. To easily
recall recurring configurations you can store up to 10 Presets in the system.
You reach the menu for the Presets by pressing the
Menu
softkey once, the cur-
sor key twice and by pressing the softkey
Select
once as confirmation.
In the input field
Presets
you can search for a certain Preset. As soon as you
enter a character, the corresponding entries of the Preset list are filtered out.
Alternatively, you can select a Preset from the list using the cursor keys
and
.
If you now press the
Ok
button, the selected Preset is loaded immediately.
By the softkey
Opt.
(Options) the following functions which you can select via
the softkey
Select
are realised:
–
Load
: The stored Preset is loaded.
–
New
: With the help of this function you can create a new Preset. All current
Operation Settings are stored.
–
Save
: The currently selected Preset is overwritten with the current Opera-
tion Settings. For safety reasons a confirmation is required.
–
Delete Preset
: The currently selected Preset is deleted. For safety reasons
a confirmation is required.
TIP
The phone book functions can also be reached directly via the QuickBook
function. Please press the following key sequence:
Names Opt. <DIGIT>
Example:
Save as Quick Dial
-
Names Opt. 5
NOTE
If the configuration has changed, you are asked if you want to
Save settings?
when you leave the Preset menu. Via the
Yes
softkey the configuration is
stored permanently in the system. This Preset is loaded automatically by the
system after the unit is connected to the power supply.