AVT MAGIC AC1, Hardware & Software Manual

Page: 43 / 162

PAGE 43
W i n d o w s P C S o f t w a r e
5.5.3.1 Audio mixer to select sources and output equipment
MAGIC DC7/AC1 provides and integrated Audio mixer which allows you to
configure Audio sources and output devices according to your requirements.
.
The Audio mixer can be configured via the overview matrix which opens via
Extras
→
Audio Mixer
(see CHAPTER 5.9.2, page 103) or via the respective
Audio output device :
•
SEND CHANNEL 1/2
• AUDIO OUT 1/2
• PHONES OUT
FIG. 16 AUDIO MIXER
Depending on the selected transmission mode, the following Audio sources
are available:
• Audio In 1/2
• Receive Channel 1/2
• Microphone
Each of these Audio sources has a digital level setting which allows an in-
creasing or decreasing of the level of 16 dB.
With the button
ON
/
OFF
you can activate or deactivate each Audio source
for the Audio output device.
For the Audio output device SEND CHANNEL 1/2 , it is possible to activate
the Auto-Ducking functionality for the Audio source Audio In 1/2 if the Mixer
Tool Plug-In option is enabled.
Each Audio output device can be switched off by pressing the
MUTE
button.
NOTE
If the fee-based software option Mixer Tool Plug-In (order number 430201) is
not enabled, you can always select only one signal for an output device at a
time.
Mixer Presets
Mute Audio Activate/deactivate Audio source
Standard
Mixer Preset
output device